Страница 1 из 1

3D в Х-ах - настройка 3D

Добавлено: 24 апр 2002, 04:06
Anonymous
У меня Mandrake 8.0, видяха GF256. X - 4.0.3.  Когда я ставлю ети дрова X-сы запускаютса но в логах есть:

cannot load glX

Все видео работает но когда я запускаю чтото с репертуара OpenGL то все кроет большим матом. Если запустил Х-сы вручную, то вываливаетса назат в консоль. Но когда запуск LINUX сразу с Х-ми, то комп виснет, а на екране белеберда (зеленые полосы).
Если чето не хватает для диагноза прошу дать рецепт :)



(Отредактировал(а) eBit - 5:37 - 24 Апр., 2002)

3D в Х-ах

Добавлено: 24 апр 2002, 17:26
Anonymous
gh

3D в Х-ах

Добавлено: 24 апр 2002, 17:29
Anonymous
Короче, слушай. Поставь GLX (если есть). А еще рекомендую почитать доки. На всякий случай приведу свой конфиг (у меня тоже Мандряк 8.0 и тоже ГеФиг:


# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

Section "Files"

   RgbPath"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath   "unix/:-1"
EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

   # Uncomment this to cause a core dump at the spot where a signal is
   # received.  This may leave the console in an unusable state, but may
   # provide a better stack trace in the core dump to aid in debugging
   #NoTrapSignals

   # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
   # This allows clients to receive this key event.
   #DontZap

   # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
   # sequences.  This allows clients to receive these key events.
   #DontZoom

   # This  allows  the  server  to start up even if the
   # mouse device can't be opened/initialised.
   AllowMouseOpenFail

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "microsoft"
Option "XkbVariant" "winkeys"
Option "XkbLayout" "ru"
Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll


EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "InputDevice"

   Identifier "Mouse1"
   Driver      "mouse"
   Option "Protocol"    "IMPS/2"
   Option "Device"      "/dev/mouse"
   Option "ZAxisMapping" "4 5"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection



Section "Module"

#Load "GLcore" # OpenGL support
Load "dri" # Direct rendering infrastructure
Load "glx" # OpenGL X protocol interface

# This loads the DBE extension module.

   Load"dbe"


# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

   Load"extmod"


# This loads the Type1 and FreeType font modules

   Load"type1"
   Load"freetype"
EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
   Identifier ""
   VendorName ""
   ModelName  ""
# 640x480, 60.0Hz; hfreq=31.469000, vfreq=59.939999
ModeLine "640x480" 25.17  640  648  744  784  480  482  484  509 -hsync -vsync
# 640x480, 67.0Hz
# 640x480, 72.0Hz; hfreq=37.861000, vfreq=72.808998
ModeLine "640x480" 31.50  640  656  696  816  480  481  484  504 -hsync -vsync
# 640x480, 75.0Hz; hfreq=37.500000, vfreq=75.000000
ModeLine "640x480" 31.50  640  656  720  840  480  481  484  500 -hsync -vsync
# 640x480, 85.0Hz; hfreq=43.269001, vfreq=85.008003
ModeLine "640x480" 36.00  640  696  752  832  480  481  484  509 -hsync -vsync
# 720x400, 70.0Hz
# 720x400, 88.0Hz
# 800x600, 56.0Hz; hfreq=35.155998, vfreq=56.250000
ModeLine "800x600" 36.00  800  824  896 1024  600  601  603  625 +hsync +vsync
# 800x600, 60.0Hz; hfreq=37.879002, vfreq=60.317001
ModeLine "800x600" 40.00  800  840  968 1056  600  601  605  628 +hsync +vsync
# 800x600, 75.0Hz; hfreq=46.875000, vfreq=75.000000
ModeLine "800x600" 49.50  800  816  896 1056  600  601  604  625 +hsync +vsync
# 800x600, 85.0Hz; hfreq=53.674000, vfreq=85.060997
ModeLine "800x600" 56.25  800  832  896 1048  600  601  604  631 +hsync +vsync
# 832x624, 75.0Hz
# 1024x768, 87.0iHz
# 1024x768, 60.0Hz; hfreq=48.362999, vfreq=60.004002
ModeLine "1024x768" 65.00 1024 1048 1184 1344  768  771  777  806 -hsync -vsync
# 1024x768, 70.0Hz; hfreq=56.476002, vfreq=70.069000
ModeLine "1024x768" 75.00 1024 1048 1184 1328  768  771  777  806 -hsync -vsync
# 1024x768, 75.0Hz; hfreq=60.022999, vfreq=75.028999
ModeLine "1024x768" 78.75 1024 1040 1136 1312  768  769  772  800 +hsync +vsync
# 1152x864, 75.0Hz; hfreq=67.500000, vfreq=75.000000
ModeLine "1152x864"108.00 1152 1216 1344 1600  864  865  868  900 +hsync +vsync
# 1280x1024, 75.0Hz; hfreq=79.975998, vfreq=75.025002
ModeLine "1280x1024"135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync

# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.

# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400"     25.175 640  664  760  800   400  409  411  450
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480"     25.175 640  664  760  800   480  491  493  525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600"     36     800  824  896 1024   600  601  603  625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
Modeline "1024x768"    44.9  1024 1048 1208 1264   768  776  784  817 Interlace

# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400"     31.5   640  672 736   832   400  401  404  445 -HSync +VSync
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480"     31.5   640  680  720  864   480  488  491  521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine  "640x480"    31.5   640  656  720  840   480  481  484  500 -HSync -VSync
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600"     40     800  840  968 1056   600  601  605  628 +hsync +vsync

# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x480"     36     640  696  752  832   480  481  484  509 -HSync -VSync
# 1152x864 @ 89 Hz interlaced, 44 kHz hsync
ModeLine "1152x864"    65    1152 1168 1384 1480   864  865  875  985 Interlace

# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600"     50     800  856  976 1040   600  637  643  666 +hsync +vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768"    65    1024 1032 1176 1344   768  771  777  806 -hsync -vsync

# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480"     45.8   640  672  768  864   480  488  494  530 -HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline  "1152x864"   89.9  1152 1216 1472 1680   864  868  876  892 -HSync -VSync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline  "800x600"    60.75  800  864  928 1088   600  616  621  657 -HSync -VSync

# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768"    75    1024 1048 1184 1328   768  771  777  806 -hsync -vsync
# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
Modeline "1280x1024"   80    1280 1296 1512 1568  1024 1025 1037 1165 Interlace

# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline  "800x600"    69.65  800  864  928 1088   600  604  610  640 -HSync -VSync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768"    85    1024 1032 1152 1360   768  784  787  823
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline  "1152x864"   92    1152 1208 1368 1474   864  865  875  895
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024"  110    1280 1328 1512 1712  1024 1025 1028 1054

# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768"   98.9  1024 1056 1216 1408   768 782 788 822 -HSync -VSync
# 1152x864 @ 78 Hz, 70.8 kHz hsync
Modeline "1152x864"   110   1152 1240 1324 1552   864  864  876  908

# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024"  126.5 1280 1312 1472 1696  1024 1032 1040 1068 -HSync -VSync
# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200"  162   1600 1664 1856 2160  1200 1201 1204 1250 +HSync +VSync
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864"   135    1152 1464 1592 1776   864  864  876  908

# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024"  135    1280 1312 1456 1712  1024 1027 1030 1064

# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768"   115.5  1024 1056 1248 1440  768  771  781  802 -HSync -VSync
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024"  135    1280 1312 1416 1664  1024 1027 1030 1064

# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200"  189    1600 1664 1856 2160  1200 1201 1204 1250 -HSync -VSync
# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864"   137.65 1152 1184 1312 1536   864  866  885  902 -HSync -VSync
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024"  157.5  1280 1344 1504 1728  1024 1025 1028 1072 +HSync +VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200"  202.5  1600 1664 1856 2160  1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200"  220    1600 1616 1808 2080  1200 1204 1207 1244 +HSync +VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024"  181.75 1280 1312 1440 1696  1024 1031 1046 1072 -HSync -VSync

# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440"  230    1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440"  250    1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync

# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384"    20.160 512  528  592  640   384  385  388  404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384"    22     512  528  592  640   384  385  388  404 -HSync -VSync

# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.

# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200"     12.588 320  336  384  400   200  204  205  225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240"     12.588 320  336  384  400   240  245  246  262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240"     15.750 320  336  384  400   240  244  246  262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300"     18     400  416  448  512   300  301  302  312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300"     20     400  416  480  528   300  301  303  314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300"     25     400  424  488  520   300  319  322  333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300"     21.656 480  496  536  616   300  301  302  312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300"     23.890 480  496  576  632   300  301  303  314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300"     25     480  496  576  632   300  301  303  314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300"     29.952 480  504  584  624   300  319  322  333 Doublescan


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
   HorizSync  30-70


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
   VertRefresh 48-120


EndSection



# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
   Identifier "Generic VGA"
   Driver     "vga"
EndSection

Section "Device"
   Identifier  "NVIDIA GeForce2 DDR (generic)"
   VendorName  "Unknown"
   BoardName   "Unknown"
   Driver      "nvidia"
   Option "NvAGP" "1"
   Option "NoLogo" "on"
   # Clock lines


   # Uncomment following option if you see a big white block        
   # instead of the cursor!                                          
   #    Option      "sw_cursor"

   Option      "DPMS"
EndSection



# **********************************************************************
# Screen sections
# **********************************************************************


Section "Screen"
   Identifier "screen1"
   Device      "NVIDIA GeForce2 DDR (generic)"
   Monitor     ""
   DefaultColorDepth 24
   Subsection "Display"
       Depth       8
       Modes       "800x600" "640x400"
       ViewPort    0 0
   EndSubsection
   Subsection "Display"
       Depth       16
       Modes       "800x600" "640x480"
       ViewPort    0 0
   EndSubsection
   Subsection "Display"
       Depth       24
       Modes       "800x600" "640x480"
       ViewPort    0 0
   EndSubsection
   Subsection "Display"
       Depth       32
       Modes       "800x600" "640x480"
       ViewPort    0 0
   EndSubsection
EndSection


Section "ServerLayout"
   Identifier "layout1"
   Screen     "screen1"
   InputDevice "Mouse1" "CorePointer"

   InputDevice "Keyboard1" "CoreKeyboard"
EndSection


Наслаждайся:-)

3D в Х-ах

Добавлено: 01 июн 2002, 16:29
Anonymous
Я его катал но ни че не помоло.
Надеюсь проблема будет ришена когда
поставлю Mandrake 8.2.