не могу соединиться через ifup

[Vitalikas]

Помогите плиииз. Пытаюсь соединяться через ifup и получаю вот что:

Serial connection established.
using channel 7
Using interface ppp0
Connect: ppp0 <--> /dev/modem
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x76ae7ec> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x76ae7ec> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x76ae7ec> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x76ae7ec> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x76ae7ec> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x76ae7ec> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x76ae7ec> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x76ae7ec> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x76ae7ec> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x76ae7ec> <pcomp> <accomp>]
LCP: timeout sending Config-Requests
Connection terminated.
Receive serial link is not 8-bit clean:
Problem: all had bit 7 set to 0

В kppp все ОК

[Anonymous]

I finally found an answer.
Usint rp-3 I went into 'advanced' and unchecked the box which says "let PPP perform authentication"
Apparently, this turned off the signals being sent by ppp and not recognized.